The pebble steel didn't come with instructions on how to swap pebble steel band. Pebble recommends to have it done at jewelry shop. You're probably looking for instructions on how to change the pebble steel band. This thread is to explain how to replace the pebble steel band strap yourself.
Tools you need
Size of pebble steel band screw driver:
- 3/64 or 1.4mm flat head precision screwdriver.
Where to find it:
This screwdriver can be found in most glasses repair kit at your local drugstore. Other retail locations have them as listed:
Sears - Craftsman 3/64 x 1 in. Screwdriver
RadioShack® 6-Piece Precision Electronics Screwdriver Set
Stanley 66-052 6-Piece Precision Screwdriver Set
Step 1) Careful unscrew the pebble steel watch band screw on the side of the band. You will see one side with the screw head.
Step 2) The screw goes across the band. Once it's loose, pull out the screw.
Step 3) The band will come off. Repeat Step 2 on other side of the watch.
Step 4) Place new band along side of watch and align with screw holes.
Step 5) Put the screw through the watch and band and re-screw on both sides.
Here is a video on YouTube on how to change and replace pebble steed band strap: